HD V-Booms
HD V-Booms are the strongest mount in their class. They are designed to hold maximum loads in most wind speeds (loading chart available upon request). They come 80% pre-assembled and packaged for ease of construction. They are made of round members and have a very low EPA (effective projected area) so they put as little stress on the tower as possible. Booms rotate for easy azimuth adjustment and are taper adjustable as well. Drawings are available in documents tab.
EHD V-Boom
EHD V-Booms are the strongest mount in their class. They are designed to hold maximum loads in most wind speeds (loading chart available upon request). They come 80% pre-assembled and packaged for ease of construction. They are made of round members and have a very low EPA (effective projected area) so they put as little stress on the tower as possible. Booms rotate for easy azimuth adjustment and are taper adjustable as well. Drawings are available in documents tab.
HC V-Booms
HC V-Booms are high capacity, medium duty mounts. They are designed to hold moderately heavy loads in the vast majority of the country. They come 80% pre-assembled and packaged for ease of construction. They are made of round members and have a very low EPA (effective projected area) so they put as little stress on the tower as possible. Booms rotate for easy azimuth adjustment and are taper adjustable as well. Drawings are available in documents tab.
Face Mount Dish Suports
These mounts allow Microwave Dishes to be mounted to the face of a tower. The kits come in a variety of face pipe sizes and lengths and includes a 4-1/2” OD x 63” Antenna Mounting Pipe. This mount works with straight or tapered tower legs up to 16″ OD Round, up to 16″ 60° Angle, or up to 12″ 90° Angle. Each kit includes universal saddle mounts, slider brackets, pipes, plates, and crossover hardware. Strut support kits and stand off kits can be ordered separately.
SAF-T-Booms
Pre-assembled (mostly angle) mount that can be used on both straight and tapered tower legs. Legs can be round member 1-1/2″ to 5-9/16″ OD and angle from 2-1/2″ x 2-1/2″ to 4″ x 4″. The pivot feature allows for rotation of the frame to desired azimuths. The mounting bracket provides additional flexibility with 0-5° down-tilt capability. One (1) 10′ tie-back arm is included. Includes enough mounting hardware for four (4) 2-3/8″ OD antenna pipes. (Antenna Pipe sold separately)
Sidearms with Tieback
Used to stand off and support single antennas. It mounts to straight or tapered leg towers and works with 1-1/2″ to 5″ OD round legs and 2″ x 2″ to 3-1/2″ x 3-1/2″ angle legs. 1.9″ OD x 3′ welded mounting pipe and all attachment hardware included. All sidearms include 1.9″ OD x 10′ tieback assembly.
Ultra Booms
Mounts to straight or tapered tower legs, round members 1-1/2″ to 5-9/16″ OD and angle from 2-1/2″ X 2-1/2″ to 4″ X 4″. Pivot feature allows for rotation of the frame to desired azimuths. The mounting bracket provides additional flexibility with 0-5° down-tilt capability. One (1) 10′ tie-back arm is included. Includes enough mounting hardware for four (4) 2-3/8″ OD antenna pipes. (Antenna Pipe sold separately)
Stand Off Brackets With Optional Face
Can be used as a simple stand off or sidearm and is capable of mounting to straight sections 1-1/2″ – 5″ OD and 2″ x 2″ to 3-1/2″ x 3-1/2″ angle. Also supports an optional 4′ face.
Knockdown T-Booms
This strong all angle mount works with straight or tapered tower legs. It mounts to round legs from 1-1/2″ to 5-9/16″ OD and angle from 2-1/2″ X 2-1/2″ to 4″ X 4″. Equipped with a pivot feature that allows for rotation of the frame to desired azimuths. Mounting brackets provide additional flexibility with 0-5° down-tilt capability. Includes one (1) 10′ (3.05 m) tie-back arm and enough mounting hardware for four (4) 2-3/8″ OD antenna pipes. (Antenna Pipe sold separately)
Universal Open Pipe Mounts
This pipe mount has an open taper adjustable bracket that allows a safety climb cable to pass through the mount. This mount works with straight or tapered tower legs up to 16″ OD Round, up to 16″ 60° Angle, or up to 12″ 90° Angle. Includes universal saddle mount, taper adjustment brackets, and is available with or without pipe.
Universal Pipe Mounting Kits
A pipe mount that allows a variety of items to be mounted fairly close to the leg of a tower. Mounts to straight or tapered tower legs, round members 1-1/2″ to 5-9/16″ OD and angle from 2-1/2″ X 2-1/2″ to 4″ X 4″. Accommodates pipe sizes from 2-3/8″ up to 4-1/2″ OD. (Pipe purchased separately)
Universal Microwave Mounting Kits
This universal microwave mounting kit allows a microwave antenna to be mounted to a tower leg. Mounts to straight or tapered tower legs, round members 1-1/2″ to 5-9/16″ OD and angle from 2-1/2″ X 2-1/2″ to 4″ X 4″. Single U-Bolt and Double U-Bolt options are available. Includes a 4-1/2″ OD X 7′-0″ antenna mounting pipe.
Small Tower Dish Mounts
Specifically used for mounting small dish type antennas to Sabre 1200 TLWD, 1800 TLWD, or SRWD. Dish mount and hardware for attachment to tower face and 2-3/8” OD x 5′ mounting pipe. (Mounting pipe included where noted)
Small Tower Sidearms
Specifically used for mounting a single antenna 3′ or 6′ from the tower leg of a Sabre 1200 TLWD, 1800 TLWD or 1800 SRWD. Sidearm and hardware for attachment to tower face and 2-3/8″ OD x 4′ Mounting Pipe. (Mounting pipe included where noted)
Heavy Duty Sidearm
Heavy Duty Sidearm, 6, With (1) 4″ x 4′ 0″ Mounting Pipe, Fits Straight Leg From 1-1/2″ to 5-9/16″ Round Leg and 3′ to 5′ Tower Face Widths
Face Mount Microwave Strut Supports
Allows a place for the microwave strut to tie back to at the proper angle along the face of a tower. This mount works with straight or tapered tower legs up to 16″ OD Round, up to 16″ 60° Angle, or up to 12″ 90° Angle. Each kit includes universal saddle mounts, brackets, pipe, and hardware. Strut Connection Clamp to be ordered separately.