EHS Guy Strand

Anchor Shafts

Used to connect guy strand to a dead man anchor block foundation. Hot-dipped galvanized with 5 to 11 holes and in various lengths ranging from 8′-2-7/8″ and 20′-8″.

Bird Flight Diverters

Makes guyed structures visible to birds, providing an economic means of reducing the hazard to both birds and guy strands. Manufactured from rigid 0.375″ and 0.5″ high impact PVC, the diverter retains good physical characteristics in the most extreme temperatures. Spacing distances of 15′ intervals are recommended for the best results. Material color is yellow.*

Dead End Grips

Dead end grips are used to terminate guy strand and are galvanized in accordance with ASTM A153.

Thimbles

For use to protect the guy strand from consistent rubbing and deterioration at the connection point. Meets Federal Specifications FF-T-276B, Type III. These Heavy Thimbles are used with guy strand or wire rope. They are open for ease of installation and galvanized in accordance with ASTM A153.

Wire Rope Clips

A wire rope clip is used to fix the loose end of the loop back to the wire rope. Meets Federal Specifications FF-C-450, Type 1, Class 1. These Wire Rope Clips are used with Guy Strand or Wire Rope, and galvanized in accordance with ASTM A153.

Dead-End Sleeves

Dead end sleeves (ice-clips) are used to finish the ends of dead end grips and are galvanized in accordance with ASTM A153.

Jaw-Eye Turnbuckles

Turnbuckles are used to connect dead end grips and anchor heads. Also used to adjust guy tension and meets Federal Speci?cations FF-T-791B, Type 1, Form 1, Class 7. Turnbuckles are galvanized in accordance with ASTM A153.

Jaw-Jaw Turnbuckles

Turnbuckles are used to connect deadend grips and anchor heads. Also used to adjust guy tension and meets Federal Specifications FF-T-791B, Type 1, Form 1, Class 8. Turnbuckles are galvanized in accordance with ASTM A153.

Screw Pin Anchor Shackles

For use on the tower end of guy strand as a termination to the tower lug. Meets the performance requirements of Federal Specifications RR-C-27lD, Type IVA, Grade A, Class 2. Shackles are galvanized in accordance with ASTM A153.

Guy Strand Hardware Kits

Kits contain all of the hardware components, except guy strand, required for a standard single guy strand assembly. Designed for use with EHS guy strand and appropriate for a specific guy size. Each kit contains (1) Jaw-Eye Turnbuckle, (1) Screw Pin Anchor Shackle, (2) Heady Thimbles, (2) Dead-End Grips (preforms), and (2) Dead-End Sleeves (ice-clips). All individual pieces are hot-dip galvanized in accordance with ASTM A153 to provide corrosion protection in the harshest environment.

Guyed Tower Materials Resources