Filter results: Mounts and Pipes

× Reset Filters
HD V-Booms

HD V-Booms

HD V-Booms are the strongest mount in their class. They are designed to hold maximum loads in most wind speeds (loading chart available u...
Learn More
EHD V-Boom

EHD V-Boom

EHD V-Booms are the strongest mount in their class. They are designed to hold maximum loads in most wind speeds (loading chart available ...
Learn More
Face Mount Dish Suports

Face Mount Dish Suports

These mounts allow Microwave Dishes to be mounted to the face of a tower. The kits come in a variety of face pipe sizes and lengths and i...
Learn More
Sidearms with Tieback

Sidearms with Tieback

Used to stand off and support single antennas. It mounts to straight or tapered leg towers and works with 1-1/2" to 5" OD round legs and ...
Learn More
Stand Off Brackets With Optional Face

Stand Off Brackets With Optional Face

Can be used as a simple stand off or sidearm and is capable of mounting to straight sections 1-1/2" - 5" OD and 2" x 2" to 3-1/2" x 3-1/2...
Learn More
Universal Open Pipe Mounts

Universal Open Pipe Mounts

This pipe mount has an open taper adjustable bracket that allows a safety climb cable to pass through the mount. This mount works with st...
Learn More
Universal Pipe Mounting Kits

Universal Pipe Mounting Kits

A pipe mount that allows a variety of items to be mounted fairly close to the leg of a tower. Mounts to straight or tapered tower legs, r...
Learn More
Universal Microwave Mounting Kits

Universal Microwave Mounting Kits

This universal microwave mounting kit allows a microwave antenna to be mounted to a tower leg. Mounts to straight or tapered tower legs, ...
Learn More
Small Tower Dish Mounts

Small Tower Dish Mounts

Specifically used for mounting small dish type antennas to Sabre 1200 TLWD, 1800 TLWD, or SRWD. Dish mount and hardware for attachment to...
Learn More
Small Tower Sidearms

Small Tower Sidearms

Specifically used for mounting a single antenna 3' or 6' from the tower leg of a Sabre 1200 TLWD, 1800 TLWD or 1800 SRWD. Sidearm and ha...
Learn More
Heavy Duty Sidearm

Heavy Duty Sidearm

Heavy Duty Sidearm, 6, With (1) 4" x 4' 0" Mounting Pipe, Fits Straight Leg From 1-1/2" to 5-9/16" Round Leg and 3' to 5' Tower Face Widths
Learn More
Face Mount Microwave Strut Supports

Face Mount Microwave Strut Supports

Allows a place for the microwave strut to tie back to at the proper angle along the face of a tower. This mount works with straight or ta...
Learn More
Crossover Plate Kits

Crossover Plate Kits

Used to attach round members perpendicular to other round members. Each kit includes one (1) plate and four (4) u-bolt assemblies.
Learn More
Crossover Clamps

Crossover Clamps

Used to attach round members perpendicular to other round members. Each kit includes two (2) clamps and four (4) bolt assemblies
Learn More
Leg Mount Microwave Strut Supports

Leg Mount Microwave Strut Supports

This kit mounts to a leg and provides a greater area for the microwave strut to tie back at the proper angle. This mount works with strai...
Learn More
Face Mount Vertical Supports

Face Mount Vertical Supports

Allows a place for a microwave strut to directly tieback to the face mount dish support. Can be adjusted to mount anywhere on tower face ...
Learn More
Microwave Strut Support Brackets

Microwave Strut Support Brackets

These brackets are used to mount a face pipe for strut support. This mount works with straight or tapered tower legs up to 16" OD Round, ...
Learn More
Microwave Waveguide Supports

Microwave Waveguide Supports

Can be used to support and protect coax from falling debris between the tower attachment and the back of the microwave dish. All (3) vers...
Learn More
Pipe to Pipe Mounting Kits

Pipe to Pipe Mounting Kits

Two brackets and associated hardware that allow two pipes to be mounted parallel to each other. (Pipe sold separately)
Learn More
Stand Off Brackets

Stand Off Brackets

Small brackets can be used as a stand off from a tower leg/pipe or two can be used together to create a simple pipe mount. Fits 1-1/4" to...
Learn More
Strut Connection Clamps

Strut Connection Clamps

These small formed pieces are used to attach strut to a pipe either vertically or horizontally. Includes clamp and u-bolt.
Learn More
Swivel Knuckle Tieback Kits

Swivel Knuckle Tieback Kits

Provides additional support to Sector Mounts and Sidearm Mounts. All hardware for attachment to the tower mount and leg is included.
Learn More
Tieback Clip Kits

Tieback Clip Kits

Used to anchor Tiebacks to tower legs. Hardware for attachment to tower leg is included.
Learn More
Antenna Seperation Kit Attachments

Antenna Seperation Kit Attachments

Each kit includes three (3) mounts for attachment to straight or tapered tower legs from 1-1/2" to 5-9/16" OD round legs and 2-1/2" x 2-1...
Learn More
Microwave Dish Face Strut Support Kit

Microwave Dish Face Strut Support Kit

Microwave Dish Face Strut Support Kit, for Guyed Towers, 3/8" x 3' x 5'-6"
Learn More
Microwave Dish Face Stand Off Strut Support Kit

Microwave Dish Face Stand Off Strut Support Kit

MICROWAVE DISH FACE STAND OFF STRUT SUPPORT KIT, SUPPORT IS 5'-6" LONG, FITS 1-1/2" OD TO 3-1/2" OD ROUND LEGS
Learn More
Large Leg Adapter Kit

Large Leg Adapter Kit

Large Leg Adapter Kit, Fits Round Legs from 1-1/2" to 10-3/4 OD and 60 Angel Legs from 2-1/2" to 8"x8"
Learn More
Tower Face Mount Stand Off Brack

Tower Face Mount Stand Off Brack

Tower Face Mount Stand Off Bracket, 14" Stand Off, Fits 2-3/8" to 4-1/2" OD Pipe, Includes Hareware (pipe Sold Seperately)
Learn More
Double Antenna Clamp

Double Antenna Clamp

Double Antenna Clamp, with 2' Separation
Learn More
HD Move Platforms

HD Move Platforms

THE M.O.V.E. (MAXIMIZE OFFSET OF VERTICAL ELEVATION) PLATFORM IS DESIGNED TO ALLOW THE MAXIMUM VERTICAL OFFSET OF YOUR ANTENNAS. THOSE A...
Learn More
V-Boom and Collar Bracket Kits for Monopoles

V-Boom and Collar Bracket Kits for Monopoles

Sabre's best in class V-Boom series are attached to monopoles utilizing tri-collar brackets. V-Booms are designed to hold maximum loads ...
Learn More
HD Low Profile Platforms

HD Low Profile Platforms

These platforms are designed with two connection levels to include kickers. Used for maximum loads in all wind and ice areas. It has opti...
Learn More
HC Low Profile Platforms

HC Low Profile Platforms

These platforms are designed with a single connection level. Used for substantial loads in most 90 MPH/low ice load areas. It has options...
Learn More
Square Platforms

Square Platforms

SQUARE LOW PROFILE PLATFORM, 12' FACE, FITS 12" - 40" MONOPOLE
Learn More
Collar Bracket Assemblies

Collar Bracket Assemblies

Used to mount Platforms, T-Arms or Stand Offs to Monopoles or other round structures. Universal surface mounting allows for a variety of ...
Learn More
Platform Handrail Kits

Platform Handrail Kits

For use with Low Profile Platforms. Handrails can come with or without extra pipes. (Extra pipes can be used for additional structural in...
Learn More
Platform Reinforcement Kits

Platform Reinforcement Kits

Universal Reinforcement Kits add vertical stability and increase the allowable loading to Low Profile Platforms. Comes with a collar ring...
Learn More
Chain Mounts

Chain Mounts

Designed to work on wood or steel (straight/round and tapered/multi-sided) poles from 8" to 36" diameter. Mounting face allows ?exibility...
Learn More
Stand Off Arms

Stand Off Arms

Allows you to stand antennas or other items off of the monopole. These are to be used with collars. (Sold separately)
Learn More
Round Member T-Arms with Collar

Round Member T-Arms with Collar

Designed to accommodate multiple face widths and antenna con?gurations. Each kit includes three (3) T-Arm Assemblies and the appropriate ...
Learn More
Saf-T-Arms With Collar

Saf-T-Arms With Collar

Provides a secure mounting face to eliminate "pipe roll" during installation. Creates a true vertical pipe alignment and offers the flexi...
Learn More
Stand Off Separation Kits

Stand Off Separation Kits

Allows for up to (6) six pipes to be mounted to a monopole or (with Antenna Seperation Kit Attachments) to self-supporting tower legs.
Learn More
Square T-Arm Work Platform Assemblies

Square T-Arm Work Platform Assemblies

Walkway for use with our SAF T-Arms. Allows the climber an area to stand while working on face-mounted antennas and RRU's. The walkway is...
Learn More
Round T-Arm, Work Platform Assembly

Round T-Arm, Work Platform Assembly

Round T-Arm, Work Platform Assembly, One Platform Per Assembly, 10' Walkway for T-Arm Face
Learn More
Monopole Dish Mount

Monopole Dish Mount

Monopole Dish Mount, With 4-1/2" OD x 5'3" Antenna Mounting Pipe
Learn More
T-Arm Pivot

T-Arm Pivot

T-Arm Pivot, Azimuth Swivel
Learn More
Antenna Mounting Pipe

Antenna Mounting Pipe

Used to mount antennas to various mounts (V-Booms, Platforms, Dish Mounts, SAF T-Booms, etc.) Available in various lengths and from 2-3/8...
Learn More
Antenna Mounting Pipe Kits

Antenna Mounting Pipe Kits

Antenna Mounting Pipe Kits are available in a variety of lengths to meet all of your antenna mounting needs. Kit includes one (1) Antenna...
Learn More
Rooftop Mounts

Rooftop Mounts

This is an angle constructed non-penetrating ballast frame roof mount that aligns multiple antennas in a single sector. Frame is designed...
Learn More
Rooftop Bridge Kits and Accessories

Rooftop Bridge Kits and Accessories

Designed to provide support and protection for horizontal runs of transmission line. This product supports coax transmission lines on thr...
Learn More
Roof Bridge Sleepers

Roof Bridge Sleepers

Sleepers are furnished with 3/4" diameter holes to accommodate Snap-In Hangers (sold separately). They are made of 4" X 4" PVC material a...
Learn More