Filter results: Grounding Rods, Wire, and Accessories

× Reset Filters
HD V-Booms

HD V-Booms

HD V-Booms are the strongest mount in their class. They are designed to hold maximum loads in most wind speeds (loading chart available u...
Learn More
EHD V-Boom

EHD V-Boom

EHD V-Booms are the strongest mount in their class. They are designed to hold maximum loads in most wind speeds (loading chart available ...
Learn More
Face Mount Dish Suports

Face Mount Dish Suports

These mounts allow Microwave Dishes to be mounted to the face of a tower. The kits come in a variety of face pipe sizes and lengths and i...
Learn More
Sidearms with Tieback

Sidearms with Tieback

Used to stand off and support single antennas. It mounts to straight or tapered leg towers and works with 1-1/2" to 5" OD round legs and ...
Learn More
Stand Off Brackets With Optional Face

Stand Off Brackets With Optional Face

Can be used as a simple stand off or sidearm and is capable of mounting to straight sections 1-1/2" - 5" OD and 2" x 2" to 3-1/2" x 3-1/2...
Learn More
Universal Open Pipe Mounts

Universal Open Pipe Mounts

This pipe mount has an open taper adjustable bracket that allows a safety climb cable to pass through the mount. This mount works with st...
Learn More
Universal Pipe Mounting Kits

Universal Pipe Mounting Kits

A pipe mount that allows a variety of items to be mounted fairly close to the leg of a tower. Mounts to straight or tapered tower legs, r...
Learn More
Universal Microwave Mounting Kits

Universal Microwave Mounting Kits

This universal microwave mounting kit allows a microwave antenna to be mounted to a tower leg. Mounts to straight or tapered tower legs, ...
Learn More
Small Tower Dish Mounts

Small Tower Dish Mounts

Specifically used for mounting small dish type antennas to Sabre 1200 TLWD, 1800 TLWD, or SRWD. Dish mount and hardware for attachment to...
Learn More
Small Tower Sidearms

Small Tower Sidearms

Specifically used for mounting a single antenna 3' or 6' from the tower leg of a Sabre 1200 TLWD, 1800 TLWD or 1800 SRWD. Sidearm and ha...
Learn More
Heavy Duty Sidearm

Heavy Duty Sidearm

Heavy Duty Sidearm, 6, With (1) 4" x 4' 0" Mounting Pipe, Fits Straight Leg From 1-1/2" to 5-9/16" Round Leg and 3' to 5' Tower Face Widths
Learn More
Face Mount Microwave Strut Supports

Face Mount Microwave Strut Supports

Allows a place for the microwave strut to tie back to at the proper angle along the face of a tower. This mount works with straight or ta...
Learn More
Crossover Plate Kits

Crossover Plate Kits

Used to attach round members perpendicular to other round members. Each kit includes one (1) plate and four (4) u-bolt assemblies.
Learn More
Crossover Clamps

Crossover Clamps

Used to attach round members perpendicular to other round members. Each kit includes two (2) clamps and four (4) bolt assemblies
Learn More
Leg Mount Microwave Strut Supports

Leg Mount Microwave Strut Supports

This kit mounts to a leg and provides a greater area for the microwave strut to tie back at the proper angle. This mount works with strai...
Learn More
Face Mount Vertical Supports

Face Mount Vertical Supports

Allows a place for a microwave strut to directly tieback to the face mount dish support. Can be adjusted to mount anywhere on tower face ...
Learn More
Microwave Strut Support Brackets

Microwave Strut Support Brackets

These brackets are used to mount a face pipe for strut support. This mount works with straight or tapered tower legs up to 16" OD Round, ...
Learn More
Microwave Waveguide Supports

Microwave Waveguide Supports

Can be used to support and protect coax from falling debris between the tower attachment and the back of the microwave dish. All (3) vers...
Learn More
Pipe to Pipe Mounting Kits

Pipe to Pipe Mounting Kits

Two brackets and associated hardware that allow two pipes to be mounted parallel to each other. (Pipe sold separately)
Learn More
Stand Off Brackets

Stand Off Brackets

Small brackets can be used as a stand off from a tower leg/pipe or two can be used together to create a simple pipe mount. Fits 1-1/4" to...
Learn More
Strut Connection Clamps

Strut Connection Clamps

These small formed pieces are used to attach strut to a pipe either vertically or horizontally. Includes clamp and u-bolt.
Learn More
Swivel Knuckle Tieback Kits

Swivel Knuckle Tieback Kits

Provides additional support to Sector Mounts and Sidearm Mounts. All hardware for attachment to the tower mount and leg is included.
Learn More
Tieback Clip Kits

Tieback Clip Kits

Used to anchor Tiebacks to tower legs. Hardware for attachment to tower leg is included.
Learn More
Antenna Separation Kit Attachments

Antenna Separation Kit Attachments

Each kit includes three (3) mounts for attachment to straight or tapered tower legs from 1-1/2" to 5-9/16" OD round legs and 2-1/2" x 2-1...
Learn More
Microwave Dish Face Strut Support Kit

Microwave Dish Face Strut Support Kit

Microwave Dish Face Strut Support Kit, for Guyed Towers, 3/8" x 3' x 5'-6"
Learn More
Microwave Dish Face Stand Off Strut Support Kit

Microwave Dish Face Stand Off Strut Support Kit

MICROWAVE DISH FACE STAND OFF STRUT SUPPORT KIT, SUPPORT IS 5'-6" LONG, FITS 1-1/2" OD TO 3-1/2" OD ROUND LEGS
Learn More
Large Leg Adapter Kit

Large Leg Adapter Kit

Large Leg Adapter Kit, Fits Round Legs from 1-1/2" to 10-3/4 OD and 60 Angel Legs from 2-1/2" to 8"x8"
Learn More
Tower Face Mount Stand Off Brack

Tower Face Mount Stand Off Brack

Tower Face Mount Stand Off Bracket, 14" Stand Off, Fits 2-3/8" to 4-1/2" OD Pipe, Includes Hareware (pipe Sold Separately)
Learn More
Double Antenna Clamp

Double Antenna Clamp

Double Antenna Clamp, with 2' Separation
Learn More
HD Move Platforms

HD Move Platforms

THE M.O.V.E. (MAXIMIZE OFFSET OF VERTICAL ELEVATION) PLATFORM IS DESIGNED TO ALLOW THE MAXIMUM VERTICAL OFFSET OF YOUR ANTENNAS. THOSE A...
Learn More
V-Boom and Collar Bracket Kits for Monopoles

V-Boom and Collar Bracket Kits for Monopoles

Sabre's best in class V-Boom series are attached to monopoles utilizing tri-collar brackets. V-Booms are designed to hold maximum loads ...
Learn More
HD Low Profile Platforms

HD Low Profile Platforms

These platforms are designed with two connection levels to include kickers. Used for maximum loads in all wind and ice areas. It has opti...
Learn More
HC Low Profile Platforms

HC Low Profile Platforms

These platforms are designed with a single connection level. Used for substantial loads in most 90 MPH/low ice load areas. It has options...
Learn More
Square Platforms

Square Platforms

SQUARE LOW PROFILE PLATFORM, 12' FACE, FITS 12" - 40" MONOPOLE
Learn More
Collar Bracket Assemblies

Collar Bracket Assemblies

Used to mount Platforms, T-Arms or Stand Offs to Monopoles or other round structures. Universal surface mounting allows for a variety of ...
Learn More
Platform Handrail Kits

Platform Handrail Kits

For use with Low Profile Platforms. Handrails can come with or without extra pipes. (Extra pipes can be used for additional structural in...
Learn More
Platform Reinforcement Kits

Platform Reinforcement Kits

Universal Reinforcement Kits add vertical stability and increase the allowable loading to Low Profile Platforms. Comes with a collar ring...
Learn More
Chain Mounts

Chain Mounts

Designed to work on wood or steel (straight/round and tapered/multi-sided) poles from 8" to 36" diameter. Mounting face allows ?exibility...
Learn More
Stand Off Arms

Stand Off Arms

Allows you to stand antennas or other items off of the monopole. These are to be used with collars. (Sold separately)
Learn More
Round Member T-Arms with Collar

Round Member T-Arms with Collar

Designed to accommodate multiple face widths and antenna con?gurations. Each kit includes three (3) T-Arm Assemblies and the appropriate ...
Learn More
Saf-T-Arms With Collar

Saf-T-Arms With Collar

Provides a secure mounting face to eliminate "pipe roll" during installation. Creates a true vertical pipe alignment and offers the flexi...
Learn More
Stand Off Separation Kits

Stand Off Separation Kits

Allows for up to (6) six pipes to be mounted to a monopole or (with Antenna Separation Kit Attachments) to self-supporting tower legs.
Learn More
Square T-Arm Work Platform Assemblies

Square T-Arm Work Platform Assemblies

Walkway for use with our SAF T-Arms. Allows the climber an area to stand while working on face-mounted antennas and RRU's. The walkway is...
Learn More
Round T-Arm, Work Platform Assembly

Round T-Arm, Work Platform Assembly

Round T-Arm, Work Platform Assembly, One Platform Per Assembly, 10' Walkway for T-Arm Face
Learn More
Monopole Dish Mount

Monopole Dish Mount

Monopole Dish Mount, With 4-1/2" OD x 5'3" Antenna Mounting Pipe
Learn More
T-Arm Pivot

T-Arm Pivot

T-Arm Pivot, Azimuth Swivel
Learn More
Antenna Mounting Pipe

Antenna Mounting Pipe

Used to mount antennas to various mounts (V-Booms, Platforms, Dish Mounts, SAF T-Booms, etc.) Available in various lengths and from 2-3/8...
Learn More
Antenna Mounting Pipe Kits

Antenna Mounting Pipe Kits

Antenna Mounting Pipe Kits are available in a variety of lengths to meet all of your antenna mounting needs. Kit includes one (1) Antenna...
Learn More
Rooftop Mounts

Rooftop Mounts

This is an angle constructed non-penetrating ballast frame roof mount that aligns multiple antennas in a single sector. Frame is designed...
Learn More
Rooftop Bridge Kits and Accessories

Rooftop Bridge Kits and Accessories

Designed to provide support and protection for horizontal runs of transmission line. This product supports coax transmission lines on thr...
Learn More
Roof Bridge Sleepers

Roof Bridge Sleepers

Sleepers are furnished with 3/4" diameter holes to accommodate Snap-In Hangers (sold separately). They are made of 4" X 4" PVC material a...
Learn More
Climbing Ladder Sections

Climbing Ladder Sections

Capable of being attached to any tower face and are 12" wide with a rung spacing of 12". Each kit comes with hardware to connect to the n...
Learn More
Step Bolt Assemblies

Step Bolt Assemblies

Used to climb poles and tower legs (for use with step clips). All parts are galvanized in accordance with ASTM A153. Each assembly includ...
Learn More
Ladder Attachment Hardware Kits

Ladder Attachment Hardware Kits

Used to attach climbing or waveguide ladder to a tower face. The kits include a J-Bolt and either J-Clips (for angle members) or Ladder B...
Learn More
Leg Mounted Waveguide Supports

Leg Mounted Waveguide Supports

WAVEGUIDE LADDER HARDWARE KIT, UNIVERSAL KIT, FOR 20' SECTIONS, FITS 1-1/2"-6" ANGLE, OR 3/4" TO 4-1/2" OD ROUND
Learn More
Waveguide Ladders

Waveguide Ladders

Ladders to attach coax and fiber to the face of a tower and have 3' rung spacing. Available in two widths, 2'-3" for twelve (12) runs of ...
Learn More
Waveguide Ladder Stacker Kits

Waveguide Ladder Stacker Kits

Designed to work with Waveguide Ladders (sold separately). Kits come complete with rungs punched with both 3/8" and 3/4" holes, spacers, ...
Learn More
Waveguide Bridges (Base Plate)

Waveguide Bridges (Base Plate)

Used to support and protect lines from falling debris. The posts of this kit bolt directly to a concrete foundation. Each kit includes Gr...
Learn More
Waveguide Bridges (Direct Burial)

Waveguide Bridges (Direct Burial)

Used to support and protect lines from falling debris. The posts of this kit are buried directly into the ground and encased in concrete....
Learn More
Grip Strut Grating

Grip Strut Grating

This Grip Strut channel can be used to support and protect lines from falling debris as part of a waveguide bridge. It also has many othe...
Learn More
Z-Bracket Trapeze Kits

Z-Bracket Trapeze Kits

Suspended below waveguide bridge grip strut panel, it allows transmission lines to be placed both above and below the bracket. The single...
Learn More
Triple-T Trapeze

Triple-T Trapeze

Triple-T Trapeze, Post Mounted Triple Level, 24-Line
Learn More
Base Plate Pipe Post Kits

Base Plate Pipe Post Kits

Provides support for grip strut channel and general support brackets. Each kit includes one (1) 3-1/2" OD pipe post with baseplate, four ...
Learn More
Direct Burial Pipe Post Kits

Direct Burial Pipe Post Kits

Provides support for Grip Strut Channel and General Support Brackets. Pipe Post has a 3-1/2" OD and requires a minimum of 3'-6" pipe embe...
Learn More
Anchor Shafts

Anchor Shafts

Used to connect guy strand to a dead man anchor block foundation. Hot-dipped galvanized with 5 to 11 holes and in various lengths ranging...
Learn More
Bird Flight Diverters

Bird Flight Diverters

Makes guyed structures visible to birds, providing an economic means of reducing the hazard to both birds and guy strands. Manufactured f...
Learn More
Dead End Grips

Dead End Grips

Dead end grips are used to terminate guy strand and are galvanized in accordance with ASTM A153.
Learn More
Thimbles

Thimbles

For use to protect the guy strand from consistent rubbing and deterioration at the connection point. Meets Federal Specifications FF-T-27...
Learn More
Wire Rope Clips

Wire Rope Clips

A wire rope clip is used to fix the loose end of the loop back to the wire rope. Meets Federal Specifications FF-C-450, Type 1, Class 1. ...
Learn More
Dead-End Sleeves

Dead-End Sleeves

Dead end sleeves (ice-clips) are used to finish the ends of dead end grips and are galvanized in accordance with ASTM A153.
Learn More
Jaw-Eye Turnbuckles

Jaw-Eye Turnbuckles

Turnbuckles are used to connect dead end grips and anchor heads. Also used to adjust guy tension and meets Federal Speci?cations FF-T-791...
Learn More
Jaw-Jaw Turnbuckles

Jaw-Jaw Turnbuckles

Turnbuckles are used to connect deadend grips and anchor heads. Also used to adjust guy tension and meets Federal Specifications FF-T-791...
Learn More
Screw Pin Anchor Shackles

Screw Pin Anchor Shackles

For use on the tower end of guy strand as a termination to the tower lug. Meets the performance requirements of Federal Specifications RR...
Learn More
Guy Strand Hardware Kits

Guy Strand Hardware Kits

Kits contain all of the hardware components, except guy strand, required for a standard single guy strand assembly. Designed for use with...
Learn More
Heavy Hex Nuts (Anchor Bolt)

Heavy Hex Nuts (Anchor Bolt)

Oversized Hex Nuts used for Anchor Bolts. Hex Nuts are galvanized in accordance with ASTMA153.
Learn More
Heavy Hex Jam Nuts

Heavy Hex Jam Nuts

Hex Jam Nuts are galvanized in accordance with ASTM A153.
Learn More
Anco Nuts

Anco Nuts

Anco Nuts are galvanized in accordance with ASTM A153.
Learn More
Pal Nuts

Pal Nuts

Pal Nuts are galvanized in accordance with ASTM A153.
Learn More
Hardened Flat Washer

Hardened Flat Washer

Flat Washers are galvanized in accordance with ASTM A153.
Learn More
Lock Washer

Lock Washer

Lock Washers are galvanized in accordance with ASTM A153.
Learn More
Bevel Washers

Bevel Washers

Bevel Washers are galvanized in accordance with ASTM A153.
Learn More
Fender Washer

Fender Washer

Fender Washer, for 3/8" Diameter Bolt 1-1/2" OD
Learn More
Threaded Rod Assemblies

Threaded Rod Assemblies

Each assembly includes one (1) Threaded Rod, two (2) Lock Washers, two (2) Flat Washers, and two (2) Hex Nuts. Additonal hardware combina...
Learn More
Threaded Rod Couplers

Threaded Rod Couplers

Couplers are used to connect threaded rods end to end and are galvanized in accordance with ASTM A153.
Learn More
U-Bolt Assemblies

U-Bolt Assemblies

Each assembly includes one (1) ASTM A36 U-Bolt, two (2) ASTM A563 Grade DH or A194 Grade 2H Heavy Hex Nuts, two (2) Flat Washers, and two...
Learn More
Bolt Assemblies

Bolt Assemblies

Each assembly includes one (1) ASTM A325 Bolt, one (1) Hex Nut, and one (1) Lock Washer. All parts are galvanized in accordance with ASTM...
Learn More
Anchor Bolt Assemblies

Anchor Bolt Assemblies

Used to anchor Self-Supporting Towers and Monopoles to the foundation. All parts are galvanized in accordance with ASTM A153. Each assemb...
Learn More
J-Bolt Assemblies

J-Bolt Assemblies

Each assembly includes one (1) ASTM A36 J-Bolt, two (2) ASTM A563 Grade DH or A194 Grade 2H Heavy Hex Nuts, one (1) Flat Washer, and one ...
Learn More
Uni-Strut

Uni-Strut

Uni-Strut, Used to attach Equipment that is 1-5/8" x 1-5/8" x 10'
Learn More
Ground Wire

Ground Wire

For use in downloads, grounding rings, etc. Supplied on reels or in coils. Order either 250' or 500' lengths.
Learn More
Ground Rods

Ground Rods

Ground rods are used for terminating grounding into soil. Available in copper, copper clad, galvanized steel, and in diameters of 5/8" an...
Learn More
Flexible Gate Jumpers

Flexible Gate Jumpers

24" long Gate Jumpers can be used with Universal Pipe Clamps (sold separately) or can be exothermically welded to gates and/or fences.
Learn More
Lightning Rods

Lightning Rods

Available in 5/8" or 3/4" diameter with a 2" threaded bottom. Each kit includes one (1) Lightning Rod, two (2) Hex Nuts, two (2) Flat Was...
Learn More
Safety Climb Bottom Bracket Kits

Safety Climb Bottom Bracket Kits

Allows the attachment of a Cable Safety Climb System (sold separately) on pipe and solid round tower legs with step bolts. All kits come...
Learn More
Safety Climb Intermediate Brackets

Safety Climb Intermediate Brackets

Allows the attachment of a Cable Safety Climb System (sold separately) or Cable Guides (sold separately) on pipe and solid round tower le...
Learn More
Safety Climb Systems (Tower)

Safety Climb Systems (Tower)

These systems meet or exceed performance requirements for the latest OSHA specifications and ANSI recommendations. They provide an ideal ...
Learn More
Safety Climb Top Bracket Kits

Safety Climb Top Bracket Kits

Allows the attachment of a Cable Safety Climb System (sold separately) on pipe and solid round tower legs with step bolts. All kits come ...
Learn More
Safety Climb Systems (Monopole)

Safety Climb Systems (Monopole)

These systems meet or exceed performance requirements for the latest OSHA specifications and ANSI recommendations; and provide an ideal m...
Learn More
Bulk Angle

Bulk Angle

Used for many different applications and available in bulk 20' lengths. From 2" x 2" x 3/16" angle, 20' long to 3" x 3" x 5/16" angle, 20...
Learn More
Bulk Pipe

Bulk Pipe

Used for many different applications and available in bulk 21' lengths. From 2-3/8" OD pipe, 21' long to 4-1/2" OD pipe, 21' long.
Learn More
Foliage Pine Wrap

Foliage Pine Wrap

Constructed of the same foliage as the replica tree branch and wraps around the face of the antenna. Made of extremely durable materials,...
Learn More
Monopine Replacement Branches

Monopine Replacement Branches

Adaptable to most manufacturers' branch receptors, the Monopine Replacement Branch is made of extremely durable materials and offers the ...
Learn More